SOFTWARE RELEASES

IDC5 OFF-HIGHWAY SOFTWARE RELEASE 16.0.0
IDC5 OFF-HIGHWAY update 16 is the state of the art of multi-brand diagnosis for agricultural and earth-moving vehicles. It is an increasingly more powerful and complete software that allows mechanics to operate accurately and professionally on the most widespread and requested makes in the AGRI and CONSTRUCTION industry. IDC5 OHW 16 also presents new DASHBOARDs and new Wiring diagrams, for an even more thorough diagnosis.
Below is a list that examines some of the new features available starting from this OFF-HIGHWAY version, dedicated to the most important makes on the market divided into the categories AGRICULTURAL VEHICLES, CONSTRUCTION, CRANES/CONTAINER TRUCKS, INDUSTRIAL ENGINES.



Main new diagnostic features
Agricultural vehicles
LANDINI
- The new Series 4 Tractor model has been developed:
• Diesel injection;
• Instrument panel;
• Switchover board (power unit);
• Rear hydraulic linkage;
• Transmission.
- New systems have been developed for the Tractor Series 6:
• Rear hydraulic linkage;
• Transmission;
• Suspended axle;
• A/C system;
• Auxiliary couplers;
• Multifunction module;
• Instrument panel;
• Switchover board (power unit).
- The new Series 6 C Tractor model has been developed:
• Diesel injection;
• Instrument panel;
• Rear hydraulic linkage;
• Switchover board (power unit);
• Transmission;
• A/C system.
- The new Series 6 L Tractor model has been developed:
• Diesel injection;
• Instrument panel;
• Switchover board (power unit);
• Rear hydraulic linkage;
- The new Series 5 D Tractor model has been developed:
• Diesel injection;
• Instrument panel;
• Rear hydraulic linkage.

McCORMICK
- The new F-N Tractor model has been developed:
• Diesel injection;
• Instrument panel.
- The new V Tractor model has been developed:
• Diesel injection;
• Instrument panel.
- The new X50 Tractor model has been developed:
• Diesel injection;
• Instrument panel;
• Rear hydraulic linkage.
- The new X6.4 Tractor model has been developed:
• A/C system;
• Tier 3B diesel injection;
• Tier 4 diesel injection;
• SCR metering unit (DCU);
• Instrument panel;
• Rear hydraulic linkage.
- The new X7.4 Tractor model has been developed:
• Suspended axle;
• A/C system;
• Auxiliary couplers;
• Diesel injection;
• SCR metering unit (DCU);
• Multifunction module;
• Instrument panel;
• Switchover board (Power unit);
• Rear hydraulic linkage;
• Transmission.
- The new X7.6 Tractor model has been developed:
• Suspended axle;
• A/C system;
• Auxiliary couplers;
• Diesel injection;
• SCR metering unit (DCU);
• Multifunction module;
• Instrument panel;
• Switchover board (Power unit);
• Rear hydraulic linkage;
• Transmission.

CLAAS, NEW HOLLAND:
simplification of the models with automatic vehicle detection.

Construction
BOBCAT:
- The diesel injection system has been developed for Skid steers S & T:
• Metering unit (DCU);
• Bosch 17CV51 Tier4 diesel injection.
- The diesel injection system has been developed for the Excavator Series E:
• Metering unit (DCU);
• Bosch 17CV51 Tier4 diesel injection.
- The Deutz diesel injection system has been developed for the telescopic lifter
series T:
• Bosch EDC 17CV54 Tier 4i diesel injection

KASSBOHRER GELANDEFAHRZEUGE
- The new PistenBully Paana model has been developed:
• Cummins J1939 Core 2 diesel injection
- The new PistenBully Canyon model has been developed:
• Volkswagen Tier 3 diesel injection.

PERLINI
- The Dumper model systems have been updated:
• Detroit (Master and Slave) diesel injection
• Allison Transmission

SANDVIK
- The new Drills model equipped with Mercedes-Benz engine type has been
developed:
• Bosch MR, PF pump (PLD) diesel injection
• Adaptation module ADM 2 engine vehicle adjustment
- The Loader and Dumper models were updated with the new Volvo Penta Tier 4
engine type.

HITACHI
- The new ZW series 3 model has been developed:
• ECM Tier 3 diesel injection
• Transtron Tier 2/3 diesel injection
- The new ZX series 5 model has been developed:
• Multifunction Display
• GPS
• ECM Engine Control Module diesel injection
• Transtron Tier 2/3 diesel injection
• Engine vehicle adjustment

BELL
- The E Series (Dumper) Tractor model equipped with Mercedes-Benz engine type has been developed:
• Tier4 diesel injection
• ACM Exhaust gas after-treatment control module
• Allison transmission (Generation 3-4)
• Allison transmission (Generation 5)

PERLINI, O & K, HITACHI (Fiat-Hitachi), BOBCAT: simplification of the models with automatic vehicle detection.

Industrial engines
- The new Detroit industrial engine has been developed:
• Diesel injection (Master and Slave).

Wiring diagrams
New Holland T6
Systems:
• Diesel injection (1)
• Selective Catalyst Reduction (1)
• Automatic transmission (16x16, 24x24) (1)
• Front linkage
• Electronic linkage
• Power steering
• Hydraulic couplers
• Suspended front axle
• Front and rear PTO

New Holland T7
Systems:
• Automatic transmission (Autocommand CVT) (1)

Valtra S Series
Systems:
• Automatic transmission (1)
• Suspended front axle
• Hydraulic couplers
• Front linkage
• Rear linkage
• Power steering
• Power take-off
• HVAC
• Four-wheel drive

(1) systems with direct connection between the errors and the related wiring diagrams.


DASHBOARD
• Transmission Control Module system for CLAAS Arion 400 Series, with specific
dashboard for the power take-off.
• Rear linkage system for CLAAS Axion 800 Series Tractor.
• Rear linkage system for CLAAS Arion 400 Series Tractor.
• A/C system for CLAAS Axion 800 Series Tractor.
• A/C system for CLAAS Arion 400 Series Tractor.
• DCM system for JCB Loaders.
• General transmission diagnosis system for JCB 500 Series Loaders.
• PTO management system for Valtra N Series Tractor.
• PTO management system for Valtra T Series Tractor.



LATEST SW RELEASES

IDC5 CAR 67 SOFTWARE UPDATE
IDC5 CAR 67 is the last update released by TEXA which once again allows taking advantage of the best features of the multi-brand diagnosis. We are talking about a great number of diagnostic developments, special function and technical information...

Read more

IDC5 MARINE SOFTWARE UPDATE VERSION 13
The MARINE update 13 includes several new features for the diagnostic coverage and database, as well as many improvements for the IDC5 software. We wish to point out the addition of the new makes KODIAK MARINE, MARINE POWER...

Read more

IDC5 TRUCK 44 SOFTWARE UPDATE
The new diagnostic features included in the IDC5 TRUCK update 44 allow working on a large number of vehicles that belong to makes of the most popular manufacturers. The work TEXA's developers carried out on industrial vehicles, light commercial...

Read more

IDC5 BIKE SOFTWARE UPDATE VERSION 30
TEXA is always looking to the future and at the quality of its products. At each software update, the diagnostic functions and coverage are further enhanced, granting bike repairers worldwide a uniquely complete...

Read more

IDC5 OFF-HIGHWAY RELEASE 17
The new IDC5 OFF-HIGHWAY 17 update is the result of extended and fruitful development work that TEXA's technicians dedicated to the most widespread and requested makes in the AGRI and CONSTRUCTION industry. Starting from this version, the software includes new important advanced diagnostic...

Read more

IDC5 CAR 66 SOFTWARE UPDATE
Once again the new CAR 66 software update allows you to benefit from the best of multi-brand diagnosis by TEXA: a large number of diagnostic developments, special functions and technical information that is essential...

Read more

SW releases archive