SOFTWARE RELEASES

IDC5 OFF-HIGHWAY SOFTWARE UPDATE 15

The new IDC5 OFF-HIGHWAY update 15 is the result of an extended and productive development work that TEXA technicians dedicated to makes that are the most widespread and requested in the AGRI and CONSTRUCTION industry. Starting from this version the software includes new important and advanced diagnostic developments able to support TEXA mechanics with incomparable and continuously evolving equipment.

 

The update represents an essential turning point as it introduces the new IDC5 software, the last evolution of TEXA’s famous software dedicated to multi-brand diagnosis, for the OFF-HIGHWAY environment. It is another step forward that will tangibly help repairers during their demanding daily work. Thanks to an important rewriting of the code, the speed has been increased further, guaranteeing a much quicker access to the communication with the control units. The design of IDC5 was studied simplifying and making all the steps needed for the operations related to maintenance and repairs more intuitive. Furthermore, all the diagnosis pages were rethought in order to provide mechanics with a complete display of the most relevant information.


Furthermore, IDC5 OFF-HIGHWAY 15 is compatible with the very new AXONE Nemo, the flagship product among TEXA's diagnostic tools.



Main new diagnostic features
Below is a list that examines some of the new features available starting from this OFF-HIGHWAY version, dedicated to the most important makes on the market divided into the categories AGRICULTURAL VEHICLES, CONSTRUCTION, CRANES/CONTAINER TRUCKS, INDUSTRIAL ENGINES:


Agricultural vehicles:
CLAAS:
• Shredder Series Jaguar: the Diesel Injection diagnosis has been added for the MAN V12 engine (Master and Slave control units). (*)
DIECI:
• Telehandlers Agri Max, Agri Plus and Agri Tech: the Denoxtronic 2 and EDC 7UC31 Diesel Injection diagnosis has been added. (*)
JCB:
• Tractor Series Fastrac: the ABS, Transmission and Gateway diagnosis has been added.
• Telehandler Series 500: Tier 4 Delphi DCM 3.3+ Diesel Injection diagnosis. (*)
JOHN DEERE:
• Tractors Series 6R: the calibration of the PowrQuad/AutoQuad and IVT
transmissions has been added.
• Tractors Series 7R: the brake calibration has been added.
• Tractors Series 8R (M.Y. 2011): the calibration of the rear linkage, front axle, A/C and brake has been added.
• Tractors Series 6J and 7J: Vehicle Check-Up; Diesel Injection; PTQ Transmission;
Rear linkage; Cabin module; Armrest. (*)
• Combine Harvester Series STS: Vehicle Check-Up and Diesel Injection. (*)
KRONE:
• Shredder Series Big-X: the Diesel Injection diagnosis has been added for the MAN
V12 engine (Master and Slave control units). (*)



Construction:
BOBCAT:

  • Excavator Series E and Skid-Steer Loaders Series S: Complete Vehicle Diagnosis.(*)

DOOSAN:

  • Loader Series DL: ErgoPower EST 37 ZF Transmission and Tier 3 Scania EMS Diesel Injection.
  • Dumper Series DA: Scania EMS Diesel injection.
  • Excavator Series DX: Cummins and Scania EMS Diesel injection.
  • Loader Series DL: EMS Scania Tier 4 and Tier 4 final Scania EMS Diesel Injection.(*)

JCB:

  • Loader Series 400, Telehandler Series 500, Loader Series TM, Backhoes Series CX and Compactor Series VM: the Tier 4 Delphi DCM 3.3+ Diesel Injection diagnosis has been added.

LIEBHERR:

  • Excavator A910 Compact: Diesel Injection for the Tier 4/Tier 3B Deutz engine.

LINK-BELT:

  • Series X2: Tier 3 Isuzu Diesel Injection diagnosis. (*)
  • Series X3 and X4: Tier 4 Isuzu Diesel Injection diagnosis. (*)

SANDVIK:

  • Loaders: Tier 4 Volvo Penta Diesel Injection.
  • Dumper: Allison transmission and Tier 4 Volvo Penta Diesel Injection.

TAKEUCHI:

  • Skid-steer loaders: Kubota Diesel Injection.

TIGERCAT:

  • Series LH, LX e TC: Tier 4 FPT Diesel Injection diagnosis and ADM2 Engine
    Vehicle Control. (*)



Industrial Engines:
CUMMINS: Diesel Injection for QSB engines.
VM Motori: Tier 3 and Tier 4. Diesel Injection. (*)
ISUZU: Diesel Injection for Tier 2/3 4 and 6 cylinder engines. (*)
FPT: EDC 17CV41 Diesel Injection. (*)



Cranes/Container TRUCKS:
- New make TEREX/DEMAG.
- TADANO-FAUN, TEREX, LIEBHERR and GROVE: the Diesel Injection diagnosis has been added for Tier 4 MTU. (*)
- TADANO-FAUN: Series ATF Mercedes-Benz 4 cylinder Crane Engine Management.
- TERBERG: Series RT and YT, the EST 37 ZF Transmission and Tier 4 Mercedes-Benz Diesel Injection has been added.
- TEREX TRUCK, GROVE, LIEBHERR E TADANO FAUN: simplification of the selections with automatic vehicle detection. (*)
GROVE: the Series RT with a Cummins engine has been added. (*)



DASHBOARDS:
- Tier 4 Delphi DCM 3.3+ JCG Diesel injection
- Master and Slave EDC 7C32 EDC 7C32 Diesel Injection. (*)


(*) Released in the 14.1.0 continuous update.



DOWNLOAD


LATEST SW RELEASES

IDC5 CAR 65 SOFTWARE UPDATE
The new software update CAR 65 offers the best of the multi-brand diagnosis by TEXA: a large number of diagnostic developments, special functions and technical information that is essential in order to complete even the most complex workshop operations successfully.

Read more

IDC5 OFF-HIGHWAY SOFTWARE RELEASE 16.0.0
IDC5 OFF-HIGHWAY update 16 is the state of the art of multi-brand diagnosis for agricultural and earth-moving vehicles. It is an increasingly more powerful and complete software that allows mechanics to operate accurately and professionally on the most widespread and requested makes in the AGRI and CONSTRUCTION industry.

Read more

IDC5 TRUCK SOFTWARE UPDATE 42.0.0
IDC5 TRUCK 42 is the utmost expression of multi-brand diagnosis in the world of industrial and commercial vehicles, buses, trailers and semi-trailers, powertrains. A software increasingly more complete and powerful that allows all TEXA mechanics to work on a very large number of vehicles belonging to ...

Read more

IDC5 SOFTWARE UPDATE CAR 64
The new CAR 64 software update is actually a double version, as it also includes the diagnostic developments of update 63. Therefore, two versions in one, with the best multi-brand diagnosis made in TEXA: a large number of diagnostic developments, special functions and technical information that is essential to complete even the most complicated workshop operations successfully.

Read more

IDC5 BIKE SOFTWARE UPDATE VERSION 28.0.0
The BIKE update 28 is a collection of diagnostic developments and technical information that makes this software unique worldwide, other than complete and constantly updated. Its coverage extends to 75 makes, while, compared to the previous version, there is an increase of 18 new models, over 300 new wiring diagrams and 200 technical sheets.

Read more

IDC5 TRUCK SOFTWARE UPDATE 41
The new diagnostic features included in the IDC5 TRUCK update 41 allow working on a large number of vehicles that belong to makes of the most popular manufacturers. The work TEXA's developers carried out on industrial vehicles, light commercial vehicles and buses guarantees all mechanics the opportunity to use diagnostic tools that are always updated and state-of-the-art, to operate successfully on a vast majority of the vehicles on the road.
The TRUCK 41 update also offers new very useful Wiring Diagrams and
DASHBOARDs.

Read more

SW releases archive